Your Modular Building Source (sm)

Office Quick Ship Store

     

 Shown with optional windows           

 Value Wall Shipping 3- 4 Days any sizes up to 12' wide!

Offers superior fire protection and noise control at a economical price.

How to install a modular Office Installation Video! click

 

Colors Tan   Gray   White

Base Price Includes click

 Request Quote  Email 

We build to any size this is just a few quick ship sizes.

 88-4 8' x 8' x 8' tall Modular Office, Electric kit no wiring (1) Light switch,(1) 2'x4' Light Fixtures 110v,(2) Outlets,(1) Breaker Box.  Floor Plan   If you want the unit pre wired add the modular electrical below.

 810-4 8' x 10' x 8 tall Modular Office, Electric kit no wiring (1) Light switch,(1) 2'x4' Light Fixtures 110v,(2) Outlets,(1) Breaker Box.   Floor Plan   If you want the unit pre wired add the modular electrical below.
 1010-4 10 ' x 10' x 8' tall Modular Office, Electric kit  no wiring (1) Light switch,(1) 2'x4' Light Fixtures 110v,(2) Outlets,(1) Breaker Box. Floor Plan   If you want the unit pre wired add the modular electrical below.
 1212-4 12' x 12' x 8' tall Modular Office, Electric kit  no wiring (1) Light switch,(3) 2'x4' Light Fixtures 110v,(3) Outlets,(1) Breaker Box.   Floor Plan    If you want the unit pre wired add the modular electrical below.
 1216-4 12' x 16' x 8' tall Modular Office, Electric kit  no wiring (1) Light switch,(3) 2'x4' Light Fixtures 110v,(4) Outlets,(1) Breaker Box.   Floor Plan   If you want the unit pre wired add the modular electrical below.
 

What is Modular Electrical Package? click 

      

 

 Modular Electrical Optional Modular Electrical Wiring Kit  Connects Outlets and Lights to Breakers for 88-4.
 Modular Electrical Optional Modular Electrical Wiring Kit  Connects Outlets and Lights to Breakers for 810-4.
 Modular Electrical Optional Modular Electrical Wiring Kit  Connects Outlets and Lights to Breakers for 1010-4.

 Modular Electrical Optional Modular Electrical Wiring Kit  Connects Outlets and Lights to Breakers for 1212-4.

 Modular Electrical Optional Modular Electrical Wiring Kit  Connects Outlets and Lights to Breakers for 1216-4.

Options

 Standard Window for 4 foot panel 3/16" Tempered Glass Steel Frame.  
 Sliding Window Tempered Glass Steel Frame.
 8000 BTU A/C w/ heat strip 110 volt, framed opening, and outlet standard electrical ready to slide in.  
 Modular electric wiring outlet add for A/C or for more outlets.   

Home

 888.823.7274

Fax 815.301.3265

Email      Freight Quote

Modular-Office. COM reserves the right to end or modify this offer at any time!

We build to any size Request for Quote / Information

Base Price Includes:

Back

Wire-Pak™ modular wiring system

 Back

   

Wire-Pak™ electrical wiring system was introduced in 1984. Wire-Pak™ is a custom designed, modular wiring system that literally snaps together as the building is assembled. The male and female connectors used are directional; thus ensuring the system cannot be assembled incorrectly -- there's no guess work.

All Wire-Pak™ pieces are interchangeable allowing for last minute field alterations. The exception to this are our 3-way switches which must be assembled in accordance to the layout provided.

Note: 3-way switches use circuits C/2 and C/3, no other item can be on C/3 with a 3-way switch.

     This comes all pre wired.

Wire-Pak™ Specifications:
  • 6 wire system utilizing three separate circuits for 110 volts 20 amps only
  • Circuit 1 (C/1) typically for outlets uses Red - Hot, White - Neutral, Green - Ground
  • Circuit 2 (C/2) typically for Lights uses Black - Hot, White - Neutral, Green - Ground
  • Circuit 3 (C/3) typically for 110v air conditioners or isolated lines uses Blue - Hot, Gray - Neutral, Green - ground
  • All wiring is 12 gage, THHN type, Stranded copper
  • All conduit to be 1/2" flexible type, .638 inside diameter, .91 outside diameter
  • The system conforms to the National Electric Code
  • All Components are UL Listed and Recognized (UL File no. E86583)
  • 220 volt outlets may be provided as separate runs to the breaker box
  • Conduit clips are provided for fastening the cabling and junction boxes to the roof. Flex conduit should be fastened every 4-1/2' and within 12" of every junction box or fitting
  • All cable runs shall not exceed 12' without having a junction box connector
  • An electrician will only be required to bring power to the building and complete the hook-up at the breaker panel.
  • No other field wiring will be necessary.
  • A complete bill of materials and electrical schematic are provided.
Wire-Pak™ Features:
  • Competitive with conventional wiring.
  • 100% reusable
  • Easy to install with a "fool proof" design
  • Future outlets can be added as needs require
  • UL listed Components
  • Meets NEC requirements
  • Accepted by most building codes across the USA.
  Wire-Pak™ Specifications
  Component Description
 
A-n
Power entry, pig tail to the breaker panel
(always female one side)
 
B-n
Flex jumper between outlets, lights, etc.
(always female)
 
C888
Universal connector junction box
(always male)
 
G-n
 Outlet assembly
(always female)
 
F-n
 Switch assembly
(always female)
 
H-n
 220 volt direct wire outlet assembly
(always pig tail)
  n = represents the length of the component

 

Warnings:
Risk of fire or electrical shock. Do not electrically connect any panel or assembly to more than one supply source. Always determine that each panel or assembly is connected to one and only one electrical power source. Note: The only known areas where this product is not acceptable by code is Cook County, Illinois. Los Angeles County, California requires county approval for all electrical systems, the expense does not justify having this. It is the responsibility of the purchaser to check for any local code restrictions.

Back

Modular-Office.com is a reseller for National Partitions.

We reserve the right to correct errors or omissions.

Modular Office does not take responsibility for the quality of the images as well as sales that resulted from the image as opposed to the quotation or description.